SKF - 225147 M | Thrust Ball Bearings | 25 × 58 × 29.80 mm

Details

SKF 225147 M is a thrust ball bearings with inner diameter 25 mm, outer diameter 58 mm and width 29.80 mm. Additional specifications include bore type CYLINDRICAL, cage standard and lubrication standard.

SKF 225147 M is listed in the Thrust Ball Bearings range under Thrust Bearings with VW Impex product serial 203862. Recorded specification details include size 25 × 58 × 29.8 mm, cylindrical bore, standard cage and standard lubrication. This self-aligning ball bearing helps support rotating shafts where moderate alignment variation can occur and is normally reviewed for fan shafts, conveyors, agricultural machinery and general rotating assemblies. Before ordering, confirm bore type, shaft size and housing clearance against the equipment manual, existing part marking or technical drawing. Catalogue note: Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.

Specifications