SKF - C 4188 K30MB/C083 | Carb Roller Bearings | 440 × 720 × 280 mm

Details

SKF C 4188 K30MB/C083 is a carb roller bearings with inner diameter 440 mm, outer diameter 720 mm and width 280 mm. Additional specifications include bore type TAPER, cage BRASS and lubrication STANDARD.

SKF C 4188 K30MB/C083 is listed in the Carb Roller Bearings range under Roller Bearings with VW Impex product serial 213870. Recorded specification details include size 440 × 720 × 280 mm, taper bore, brass cage, standard lubrication and weight 464 kg. This self-aligning ball bearing helps support rotating shafts where moderate alignment variation can occur and is normally reviewed for fan shafts, conveyors, agricultural machinery and general rotating assemblies. Before ordering, confirm bore type, shaft size and housing clearance against the equipment manual, existing part marking or technical drawing. Catalogue note: CARB toroidal roller bearings are unique as well as accommodating misalignment without increased stress levels, they also provide frictionless axial movement within the bearing in the non-locating position in self-aligning bearing arrangements. Being SKF Explorer bearings, they can accommodate higher load levels and provide significantly extended service life.

Specifications