SKF - C 2234 K/C3 | Carb Roller Bearings | 170 × 310 × 86 mm

Details

SKF C 2234 K/C3 is a carb roller bearings with inner diameter 170 mm, outer diameter 310 mm and width 86 mm. Additional specifications include bore type TAPER, cage STEEL and lubrication STANDARD.

SKF C 2234 K/C3 is listed in the Carb Roller Bearings range under Roller Bearings with VW Impex product serial 213876. Recorded specification details include size 170 × 310 × 86 mm, taper bore, steel cage, standard lubrication and weight 28.1 kg. This self-aligning ball bearing helps support rotating shafts where moderate alignment variation can occur and is normally reviewed for fan shafts, conveyors, agricultural machinery and general rotating assemblies. Before ordering, confirm bore type, shaft size and housing clearance against the equipment manual, existing part marking or technical drawing. Catalogue note: CARB toroidal roller bearings are unique as well as accommodating misalignment without increased stress levels, they also provide frictionless axial movement within the bearing in the non-locating position in self-aligning bearing arrangements. Being SKF Explorer bearings, they can accommodate higher load levels and provide significantly extended service life.

Specifications