Details
V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. V-rings can accommodate circumferential speeds up to 7 m/s. For circumferential speeds between 7 and 12 m/s, they should be located axially on the shaft. At speeds above 12 m/s, a support ring must be used to prevent the seal from lifting. Seals per pack: 2 Material: nitrile rubber, steel Temperature range: -40°C to +100°C
Specifications
Inner Diameter |
40.00 MM |
Outer Diameter |
50.00 MM |
Width |
9.00 MM |
Weight |
0.015 kg |
Cage |
No cage |
Seal |
Material: nitrile rubber, steel |
Lubrication |
No |
Category |
Housings |