SKF - S7216 ACDGA/P4A | Angular Contact Ball Bearing Spindle | 80 × 140 × 26 mm

Details

SKF S7216 ACDGA/P4A is an angular contact ball bearing spindle with inner diameter 80 mm, outer diameter 140 mm and width 26 mm. Additional specifications include bore type CYLINDRICAL, seal YES, cage YES and lubrication STANDARD.

SKF S7216 ACDGA/P4A is listed in the Angular Contact Ball Bearing Spindle range under Ball Bearings with VW Impex product serial 1216293. Recorded specification details include size 80 × 140 × 26 mm, cylindrical bore, seal available, cage available and standard lubrication. This bearing seal or retaining component supports contamination control, lubricant retention or bearing-position sealing and is normally reviewed for bearing sealing positions, dust exclusion and lubricant-retention work. Before ordering, confirm inside diameter, outside diameter and width against the equipment manual, existing part marking or technical drawing. Catalogue note: These super-precision, high-capacity, single row angular contact ball bearings, with non-contact seals, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed to accommodate heavy loads at relatively high speeds under low to moderate operating temperatures.

Specifications