SKF - QJ 330 N2MA | Four Point Contact Ball Bearing | 150 × 320 × 65 mm

Details

SKF QJ 330 N2MA is a four point contact ball bearing with inner diameter 150 mm, outer diameter 320 mm and width 65 mm. Additional specifications include bore type CYLINDRICAL, cage STANDARD and lubrication STANDARD.

SKF QJ 330 N2MA is listed in the Four Point Contact Ball Bearing range under Ball Bearings with VW Impex product serial 18735. Recorded specification details include size 150 × 320 × 65 mm, cylindrical bore, standard cage, standard lubrication and weight 28 kg. This mounted bearing or housing unit provides a mounted support point for a rotating shaft and is normally reviewed for conveyors, fans, processing machinery and general rotating equipment. Before ordering, confirm shaft size, bolt pattern and housing style against the equipment manual, existing part marking or technical drawing. Catalogue note: Four-point contact ball bearings with locating slots can accommodate high axial loads in both directions and small radial loads. They can operate at very high speeds and are more suitable than deep groove ball bearings for supporting large axial forces. The outer ring, with ball and cage assembly, can be mounted separately from the two inner ring halves. The locating slots can be used to prevent the outer ring from rotating.

Specifications