SKF - QJ 222 N2MA/C3 | Four Point Contact Ball Bearing | 110 × 200 × 38 mm

Details

SKF QJ 222 N2MA/C3 is a four point contact ball bearing with inner diameter 110 mm, outer diameter 200 mm and width 38 mm. Additional specifications include bore type CYLINDRICAL, cage STANDARD and lubrication STANDARD.

SKF QJ 222 N2MA/C3 is listed in the Four Point Contact Ball Bearing range under Ball Bearings with VW Impex product serial 203502. Recorded specification details include size 110 × 200 × 38 mm, cylindrical bore, standard cage and standard lubrication. This mounted bearing or housing unit provides a mounted support point for a rotating shaft and is normally reviewed for conveyors, fans, processing machinery and general rotating equipment. Before ordering, confirm shaft size, bolt pattern and housing style against the equipment manual, existing part marking or technical drawing. Catalogue note: Four-point contact ball bearings with locating slots can accommodate high axial loads in both directions and small radial loads. They can operate at very high speeds and are more suitable than deep groove ball bearings for supporting large axial forces. The outer ring, with ball and cage assembly, can be mounted separately from the two inner ring halves. The locating slots can be used to prevent the outer ring from rotating.

Specifications