Details
(2Z/WT) 2Z=Shield Of Pressed Sheet Steel On Both Sides Of The Bearing. WT=(Segment Lubrication, Code W)=Grease Fill For Low As Well As High Temperature e.g. -40°C/+160°C. WT Or A Two-Figure Number Following WT Identifies The Actual Grease. An Additional Letter Or Letter/ Figure Combination As Mentioned Under “HT” Identifies Filling Degrees Other Than Standard.
Specifications
Inner Diameter |
15.00 MM |
Outer Diameter |
32.00 MM |
Width |
9.00 MM |
Cage |
Steel |
Seal |
Yes |
Bore |
Cylindrical |
Category |
Ball bearings |