SKF - 3318 ATN9/C3 | Angular Contact Ball Bearing-double Row | 90 × 190 × 73 mm

Details

SKF 3318 ATN9/C3 is an angular contact ball bearing-double row with inner diameter 90 mm, outer diameter 190 mm and width 73 mm. Additional specifications include bore type CYLINDRICAL, cage STANDARD and lubrication STANDARD.

SKF 3318 ATN9/C3 is listed in the Angular Contact Ball Bearing-double Row range under Ball Bearings with VW Impex product serial 203391. Recorded specification details include size 90 × 190 × 73 mm, cylindrical bore, standard cage and standard lubrication. This bearing seal or retaining component supports contamination control, lubricant retention or bearing-position sealing and is normally reviewed for bearing sealing positions, dust exclusion and lubricant-retention work. Before ordering, confirm inside diameter, outside diameter and width against the equipment manual, existing part marking or technical drawing. Catalogue note: Double row angular contact ball bearings correspond, in their design and operation, to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space. They can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions.

Specifications