SKF - 2311/C3 | Self-align Ball Bearings | 55 × 120 × 43 mm

Details

SKF 2311/C3 is a self-align ball bearings with inner diameter 55 mm, outer diameter 120 mm and width 43 mm. Additional specifications include bore type CYLINDRICAL, cage STANDARD and lubrication STANDARD.

SKF 2311/C3 is listed in the Self-align Ball Bearings range under Ball Bearings with VW Impex product serial 203622. Recorded specification details include size 55 × 120 × 43 mm, cylindrical bore, standard cage and standard lubrication. This self-aligning ball bearing helps support rotating shafts where moderate alignment variation can occur and is normally reviewed for fan shafts, conveyors, agricultural machinery and general rotating assemblies. Before ordering, confirm bore type, shaft size and housing clearance against the equipment manual, existing part marking or technical drawing. Catalogue note: Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Material : The inner and outer rings are made of standard, high-quality bearing steel.

Specifications