SKF - 207-ZNR | Deep Groove Ball Bearing | 35 × 72 × 17 mm

Details

SKF 207-ZNR is a DEEP GROOVE BALL BEARING with inner diameter 35 mm, outer diameter 72 mm and width 17 mm. Additional specifications include bore type CYLINDRICAL, cage STEEL and lubrication STANDARD.

Single row deep groove ball bearings with filling slots, a snap ring, and shields on one or both sides, accommodate more balls than standard deep groove ball bearings. They are of a simple, yet versatile, design and are robust in operation, requiring little maintenance. They can accommodate radial and axial loads in both directions. They have a higher radial load carrying capacity than the corresponding bearings without filling slots but have a limited axial load carrying capacity due to the filling slots. The snap ring, fitted in an annular groove in the outer ring, facilitates axial location of the bearings within their housings. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out. Features are : Snap ring facilitates axial location within housing, Simple, versatile and robust design, Accommodate higher radial loads than corresponding bearings without filling slots, with limited axial loads in both directions, Require little maintenance. Z=Shield Of Pressed Sheet Steel On One Side Of The Bearing, NR=Snap Ring Groove In Bearing Outer Ring And Appropriate Snap Ring.

Specifications