SKF - 11207 TN9 | Self-align Ball Bearings | 35 × 72 × 52 mm

Details

SKF 11207 TN9 is a self-align ball bearings with inner diameter 35 mm, outer diameter 72 mm and width 52 mm. Additional specifications include bore type CYLINDRICAL, cage STANDARD and lubrication STANDARD.

SKF 11207 TN9 is listed in the Self-align Ball Bearings range under Ball Bearings with VW Impex product serial 18459. Recorded specification details include size 35 × 72 × 52 mm, cylindrical bore, standard cage, standard lubrication and weight 0.54 kg. This self-aligning ball bearing helps support rotating shafts where moderate alignment variation can occur and is normally reviewed for fan shafts, conveyors, agricultural machinery and general rotating assemblies. Before ordering, confirm bore type, shaft size and housing clearance against the equipment manual, existing part marking or technical drawing. Catalogue note: Self-aligning ball bearings, with extended inner ring, have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are insensitive to angular misalignment of the shaft relative to the housing. The extended inner ring enables use of commercial grade shafting and axially location on the shaft by means of a slot at one end of the inner ring.

Specifications