NILOS - J80 | A & J Type Sealing Ring | 60 × 80 × 3.50 mm

Details

NILOS J80 is an a & j type sealing ring with inner diameter 60 mm, outer diameter 80 mm and width 3.50 mm. Additional specifications include bore type cylindrical.

NILOS J80 is listed in the A & J Type Sealing Ring range under Seals/snap Rings with VW Impex product serial 104136. Recorded specification details include size 60 × 80 × 3.5 mm, cylindrical bore and PDF reference available. This bearing seal or retaining component supports contamination control, lubricant retention or bearing-position sealing and is normally reviewed for bearing sealing positions, dust exclusion and lubricant-retention work. Before ordering, confirm inside diameter, outside diameter and width against the equipment manual, existing part marking or technical drawing. Catalogue note: The various types of NILOS Spacer- Ring depend on the relevant shaft or housing diameter. They can be used for almost all types of NILOS Rings for inner and outer sealing with the exception of the series 618, 619 and AK rings. The width of the spacer ring prevents any jamming of the NILOS-Ring in the groove of the locking ring and installation pliers cannot collide with the bevelling on the NILOS-Ring.

Specifications