KMF - PBXD065 | Thin Section Ball Bearings | 165.10 × 190.50 × 12.70 mm

Details

KMF PBXD065 is a THIN SECTION BALL BEARINGS with inner diameter 165.10 mm, outer diameter 190.50 mm and width 12.70 mm. Additional specifications include bore type cylindrical and cage standard.

KMF PBXD065 is listed in the Thin Section Ball Bearings range under Ball Bearings with VW Impex product serial 153660. Recorded specification details include size 165.1 × 190.5 × 12.7 mm, cylindrical bore, standard cage, weight 0.519 kg and PDF reference available. This ball bearing supports smooth shaft rotation in general radial-load applications and is normally reviewed for electric motors, pumps, fans, gearboxes, conveyors and general rotating equipment. Before ordering, confirm bore size, outside diameter and width against the equipment manual, existing part marking or technical drawing. Catalogue note: PBXD 065 The KMF SLIM-SPLIT-BEARING is a four point contact ball bearing, which is able to take loads from all directions, such as axial, radial and moment loads, due to the pressure angle of 90°. These are manufactured in stainless steel. Bearing rings and balls are made of stainless and acid-resistant steel X46Cr13 (material No. 1.4034). The cage strip is made of Polyamide 12.

Specifications