INA - PAGBAO40-PP-AS | Linear Ball Bearing Unit | 40 × 108 × 82.40 mm

Details

INA PAGBAO40-PP-AS is a linear ball bearing unit with inner diameter 40 mm, outer diameter 108 mm and width 82.40 mm. Additional specifications include bore type CYLINDRICAL, cage STANDARD and lubrication STANDARD.

INA PAGBAO40-PP-AS is listed in the Linear Ball Bearing Unit range under Linear Bearings with VW Impex product serial 1208697. Recorded specification details include size 40 × 108 × 82.4 mm, cylindrical bore, standard cage, standard lubrication and weight 0.91 kg. This plain bearing or rod-end bearing allows angular movement in a linkage, pivot or oscillating joint and is normally reviewed for articulating joints, linkage systems, pivots and oscillating industrial assemblies. Before ordering, confirm bore size, thread or mounting style and seal arrangement against the equipment manual, existing part marking or technical drawing. Catalogue note: The INA PAGBAO-PP-AS bearing is a linear plain bearing and housing unit. It features an open design with a segment cutout, making it suitable for use on supported shafts where high loads must be absorbed under relatively slow movements. As a plain bearing (using a friction bushing), it provides a significantly larger contact area than ball bearings.

Specifications