IBC WALZLAGER GMBH - CBHM 7004.C.T.2RSZ.P4A.DBO.GS41

Details

The HM design combines the advantages of the other two versions. It achieves almost as high speeds as the H version and at the same time has load ratings that are only slightly below the standard version. The HM design has a more open raceway curvature, which ensures less friction and thus lower heat generation in the rolling bearing. DBO (DB = Set Of 2 Bearings O-Arrangement, O = Bearing Set Has No Preload Or Play), T = Cage Of Machined Phenolic Resin, Located On Rolling Elements. P4A = Bearing With Extreme High Running Accuracy (Abec9) And Form Tolerance (Abec7). The optional sealing on one or both sides with non-abrasive sealing washers (2RSZ), which do not restrict the suitability for high speeds, give the sealed high precision angular contact ball bearings the ideal protection against contamination and air flows. In addition, the seals act to retain the grease for vertical or swiveling spindles.

Specifications