IBC WALZLAGER GMBH - BS 17M47.P4A.DFM | Ballscrew Bearing | 17 × 47 × 30 mm

Details

IBC WALZLAGER GMBH BS 17M47.P4A.DFM is a ballscrew bearing with inner diameter 17 mm, outer diameter 47 mm and width 30 mm. Additional specifications include bore type cylindrical.

IBC WALZLAGER GMBH BS 17M47.P4A.DFM is listed in the Ballscrew Bearing range under Ball Bearings with VW Impex product serial 164919. Recorded specification details include size 17 × 47 × 30 mm, cylindrical bore and weight 0.26 kg. This thrust bearing or thrust washer supports axial-load positions rather than primarily radial shaft loads and is normally reviewed for vertical shafts, rotary tables, gear units and thrust-support arrangements. Before ordering, confirm shaft washer size, housing washer size and overall height against the equipment manual, existing part marking or technical drawing. Catalogue note: IBC precision 60° axial Angular Contact Ball Bearing Single Row (BS) absorb axial forces on one side and are therefore usually used in pairs placed against each other. High axial rigidity. The bearing has a polyamide cage with many balls, which increases its rigidity. Compact design. The 60° contact angle allows the bearing to carry thrust load and some radial load, which makes it compact. Low noise.

Specifications