FAG - 6211-M-S1-J20AA-C4 | Insulated Bearing | 55 × 100 × 21 mm

Details

FAG 6211-M-S1-J20AA-C4 is an insulated bearing with inner diameter 55 mm, outer diameter 100 mm and width 21 mm. Additional specifications include bore type CYLINDRICAL, cage BRASS and lubrication STANDARD.

FAG 6211-M-S1-J20AA-C4 is listed in the Insulated Bearing range under Ball Bearings with VW Impex product serial 14538. Recorded specification details include size 55 × 100 × 21 mm, cylindrical bore, brass cage, standard lubrication and weight 0.59 kg. This bearing seal or retaining component supports contamination control, lubricant retention or bearing-position sealing and is normally reviewed for bearing sealing positions, dust exclusion and lubricant-retention work. Before ordering, confirm inside diameter, outside diameter and width against the equipment manual, existing part marking or technical drawing. Catalogue note: M=Solid Brass Cage, J20AA=Coating Which Consists Of Oxide Ceramic, . C4=Internal Clearance Larger Than Normal. It is “open” — i.e., not sealed or shielded by default (no contact seals) . Material: High‑carbon chromium steel (e.g. 52100 grade) is standard for FAG deep groove bearings. Operating temperature: Up to about +200 °C for the stabilized rings (S1 rating).

Specifications