DURBAL - DGE440ES-2RS | Rod Ends Units | 440 × 600 × 218 mm

Details

DURBAL DGE440ES-2RS is a rod ends units with inner diameter 440 mm, outer diameter 600 mm and width 218 mm. Additional specifications include bore type CLYLINDRICAL, seal YES, cage YES and lubrication YES.

DURBAL DGE440ES-2RS is listed in the Rod Ends Units range under Special Bearings with VW Impex product serial 152559. Recorded specification details include size 440 × 600 × 218 mm, clylindrical bore, seal available, cage available, lubrication available, weight 193 kg and PDF reference available. This bearing seal or retaining component supports contamination control, lubricant retention or bearing-position sealing and is normally reviewed for bearing sealing positions, dust exclusion and lubricant-retention work. Before ordering, confirm inside diameter, outside diameter and width against the equipment manual, existing part marking or technical drawing. Catalogue note: XXL-LARGE-RADIAL-SPHERICAL PLAIN BEARINGS Sliding combination steel / steel, series C, according to DIN ISO 12240-1. Outer ring: Ball bearing steel, hardened, ground, phosphated, single split, with oil groove and drill holes, optional with -2RS lip seals on both sides. Joint ball: Ball bearing steel, hardened, ground, phosphated. Maintenance Required.

Specifications