DURBAL - DGE320ES-2RS | Rod Ends Units | 320 × 440 × 160 mm

Details

DURBAL DGE320ES-2RS is a rod ends units with inner diameter 320 mm, outer diameter 440 mm and width 160 mm. Additional specifications include bore type CLYLINDRICAL, seal YES, cage YES and lubrication YES.

DURBAL DGE320ES-2RS is listed in the Rod Ends Units range under Special Bearings with VW Impex product serial 152553. Recorded specification details include size 320 × 440 × 160 mm, clylindrical bore, seal available, cage available, lubrication available, weight 77 kg and PDF reference available. This bearing seal or retaining component supports contamination control, lubricant retention or bearing-position sealing and is normally reviewed for bearing sealing positions, dust exclusion and lubricant-retention work. Before ordering, confirm inside diameter, outside diameter and width against the equipment manual, existing part marking or technical drawing. Catalogue note: XXL-LARGE-RADIAL-SPHERICAL PLAIN BEARINGS Sliding combination steel / steel, series C, according to DIN ISO 12240-1. Outer ring: Ball bearing steel, hardened, ground, phosphated, single split, with oil groove and drill holes, optional with -2RS lip seals on both sides. Joint ball: Ball bearing steel, hardened, ground, phosphated. Maintenance Required.

Specifications