DURBAL - DGE 340 DW | Rod Ends Units | 340 × 460 × 160 mm

Details

DURBAL DGE 340 DW is a rod ends units with inner diameter 340 mm, outer diameter 460 mm and width 160 mm. Additional specifications include bore type CLYLINDRICAL, seal YES, cage YES and lubrication YES.

DURBAL DGE 340 DW is listed in the Rod Ends Units range under Special Bearings with VW Impex product serial 160302. Recorded specification details include size 340 × 460 × 160 mm, clylindrical bore, seal available, cage available, lubrication available, weight 82 kg and PDF reference available. This bearing seal or retaining component supports contamination control, lubricant retention or bearing-position sealing and is normally reviewed for bearing sealing positions, dust exclusion and lubricant-retention work. Before ordering, confirm inside diameter, outside diameter and width against the equipment manual, existing part marking or technical drawing. Catalogue note: XXL-LARGE-RADIAL-SPHERICAL PLAIN BEARINGS Sliding combination steel / PTFE, series C, according to DIN ISO 12240-1. Outer ring: Heat-treated steel, hardened, radially split, it is held together by means of screws and dowel pins, bonded with PTFE - sheet, optional with -2RS lip seals on both sides.

Specifications