CLARK SEALS - CS-7010 | Bearing & Seals | 5 × 7.18 × 0.34 inch

Details

CLARK SEALS CS-7010 is a bearing & seals with inner diameter 5 inch, outer diameter 7.18 inch and width 0.34 inch. Additional specifications include bore type CYLINDRICAL.

CLARK SEALS CS-7010 is listed in the Bearing & Seals range under Seals/snap Rings with VW Impex product serial 183735. Recorded specification details include size 5 × 7.18 × 0.34 inch, cylindrical bore and PDF reference available. This bearing seal or retaining component supports contamination control, lubricant retention or bearing-position sealing and is normally reviewed for bearing sealing positions, dust exclusion and lubricant-retention work. Before ordering, confirm inside diameter, outside diameter and width against the equipment manual, existing part marking or technical drawing. Catalogue note: This Seal to be used with CONE = NA48290SW, CUP = 48220D. Sheave Seals are specifically designed for use with Timken 's TNASW and TNASWE tapered roller bearing assemblies. The Sheave Seals make the bearing assembly a "unitized" sealing unit. Sheave Seals are designed for grease lubricants.

Specifications