CLARK SEALS - C0-860 | Bearing & Seals | 11.81 × 14.48 × 0.19 inch

Details

CLARK SEALS C0-860 is a bearing & seals with inner diameter 11.81 inch, outer diameter 14.48 inch and width 0.19 inch. Additional specifications include bore type CYLINDRICAL.

CLARK SEALS C0-860 is listed in the Bearing & Seals range under Seals/snap Rings with VW Impex product serial 183945. Recorded specification details include size 11.81 × 14.48 × 0.19 inch, cylindrical bore and PDF reference available. This bearing seal or retaining component supports contamination control, lubricant retention or bearing-position sealing and is normally reviewed for bearing sealing positions, dust exclusion and lubricant-retention work. Before ordering, confirm inside diameter, outside diameter and width against the equipment manual, existing part marking or technical drawing. Catalogue note: Full Face CO and CN Excluder Seals are designed for radial ball bearings such as deep grooved, double row, maximum capacity, and angular contact as well as spherical and cylindrical roller bearings that already contain an integral seal or shield. CO & CN type seals can be used on single and double row Radial Ball, Max.

Specifications