Carter Bearings - CYDR-400-S | Carter Cam Followers | 1.25 × 4 × 2.31 mm

Details

Carter Bearings CYDR-400-S is a carter cam followers with inner diameter 1.25 mm, outer diameter 4 mm and width 2.31 mm. Additional specifications include bore type CYLINDRICAL, cage YES and lubrication YES.

Carter Bearings CYDR-400-S is listed in the Carter Cam Followers range under Special Bearings with VW Impex product serial 156645. Recorded specification details include size 1.25 × 4 × 2.31 mm, cylindrical bore, cage available and lubrication available. This bearing seal or retaining component supports contamination control, lubricant retention or bearing-position sealing and is normally reviewed for bearing sealing positions, dust exclusion and lubricant-retention work. Before ordering, confirm inside diameter, outside diameter and width against the equipment manual, existing part marking or technical drawing. Catalogue note: CARTERS Heavy Cylindrical Roller Bearings (CCDR Series) are interchangeable with standard needle CAM follower designs. Heavy Cylindrical Roller Bearings are capable of keeping the grease in until re-lube pressure is applied. The comparatively large diameter of the rollers provides substantially increased dynamic capacity and fatigue life.

Specifications